• the fifty-three station

    of the tokaido

    東海道五十三次

    歌川廣重

    Hot Swappable

    RGB Backlit

  • broken image

    The fifty-three station

    of the tokaido

     
     

  • the fifty-three station of the tokaido

    v60the2 series

    Hot Swappable

    Hot-Swappable

    Easily remove and install any MX-based switch

    RGB Backlit

    18 RGB Mode pre-installed

    16.8 million colors RGB

    Embedded Three Dye Sublimated Key

    Esc / Enter / Space Bar

    PBT Double Shot Keycap

    Seamless shine through keycap with tranperant legends

    N-KEY ROLLOVER

    anti-ghosting technology

    Detachable USB-C

    easier to use and more powerful

  • learn more about

    The Fifty-Three Stations of the Tōkaidō

    The Fifty-Three Stations of the Tōkaidō (東海道五十三次, Tōkaidō Gojūsan-tsugi), in the Hōeidō edition (1833–1834), is a series of ukiyo-e woodcut prints created by Utagawa Hiroshige after his first travel along the Tōkaidō in 1832.[1]

    The Tōkaidō road, linking the shōgun's capital, Edo, to the imperial one, Kyōto, was the main travel and transport artery of old Japan. It is also the most important of the "Five Roads" (Gokaidō)—the five major roads of Japan created or developed during the Edo period to further strengthen the control of the central shogunate administration over the whole country.

    Even though the Hōeidō edition is by far the best known, The Fifty-Three Stations of the Tōkaidō was such a popular subject that it led Hiroshige to create some 30 different series of woodcut prints on it, all very different one from the other by their size (ōban or chuban), their designs or even their number (some series include just a few prints).

  • broken image

    Leaving Edo : Nihonbashi, (The bridge of Japan)

    broken image

    26th station : Kakegawa

    broken image

    The end of the Tōkaidō: arriving at Kyoto.

    broken image

    Five side Dye-Sub Enter Key

    broken image

    Five-Side Dye-Sub ESC Key

    broken image

    Five Side Dye-Sub Space Bar

  • broken image

    Hot swap pcb desogn

    Easily remove and install any MX-based switch without any soldering. Personalize to what works for you, and use any combinations of switches!

  • How to remove the switches

    • When removing the switches, use the switch puller. Unclip the top and bottom clips while pulling up gently.
    • The low profile switches are more difficult to remove. When removing them, make sure you clip the sides.
    • Be careful not to scratch the keyboard with the puller.
    • BE VERY CAREFUL when mounting the switches! If you feel a lot of resistance, don’t continue pushing. If you push too hard, you could break an electronic component and void the warranty.
    • When mounting the switches, align the pins and insert them into the correct holes. The same applies to the low profile switches.
    • Be careful not to bend the metal pins when mounting the switches.
    • While fitting the switches, do it gently. If you feel a lot of resistance, don’t continue pushing. If you push too hard you could break an electronic component and void the warranty.
    • The hole on the switch where the LED light shines through should be at the top.

  • broken image

    Dye-sublimation printing

    Dye-sublimation printing (or dye-sub printing) is a computer printing technique which uses heat to transfer dye onto materials such as a plastic, card, paper, or fabric. The sublimation name was first applied because the dye was considered to make the transition between the solid and gas states without going through a liquid stage. This understanding of the process was later shown to be incorrect, as there is some liquefying of the dye. Since then, the proper name for the process has become known as dye-diffusion, though this technically-correct term has not supplanted the original name. Many consumer and professional dye-sublimation printers are designed and used for producing photographic prints, ID cards, clothing, and more.

  • broken image

    Seamless PBT Double shot keycap

    beside ESC/Enter/Space bar , others in shine through transperant on White seamless keycap with tranperant legends PBT Double Shot keycaps. Unlike printing, this keycap type is produced when two layers of plastic are molded into each other. No printing necessary. The end result is a key legend which will never fade or chip off. ABS keys will develop a shine over time; but PBT keys will retain their texture even after heavy use.

  • Precision laser engraving

    Laser engraving Right and Left Shift. The technique does not involve the use of inks, nor does it involve tool bits which contact the engraving surface and wear out

  • broken image

    engine

    Customize V60 the2

    Backlit / Button / Macro Setting

     

  • broken image

    special feature

    Arrow mode : lock right corner as arrow keys!

    Mac mode : swift alt as Command key!

    Default Setting : clean all memory and back to original status!

  • broken image

    accessories

    White Enter Key

    White ESC Key

    Wire keypuller

    Switch puller

     

    Bonus

    Vertical 1 x 2 Enter key Dye-Sub Wave

  • review

     

    broken image

    Review

     

    broken image

    More photos

     

  • You decide how it should feel

    Choose the mechanical switches that fit your needs.

    broken image

    Cherry series

    MX Brown / Red / Black / Blue /

    Silent Red / Silver

    broken image

    Kailh series

    Box White / Brown / Burnt Orange / Dark Yellow

    Jade / Navy

    Speed Cooper / Bronze / Silver

    Silent Pink

    broken image

    Gateron series

    Brown / Red / Yellow / Clear / Green

  • Q & A

    find the info you need here!

    Q : What is the difference between V60 , V60 Type R and V60 THE2

    • V60 : design in 2014 and discontinue in Dec., 2020
    • V60Type R : Open source firmware. Support TMK and QMK. If you are familiar with QMK to re-map layout, V60Type R might be your best choose.  2 options,Type R standard model not offer any backlit, pure typing. Keycaps coule be in ABS Black or ABS Double Shot ( Deep Ocean or Purple Dream ) Type R Polestar with shine through keycap , offer front White LED and rear RGB underglow backlit. And Type R Polestar with ABS double shot keycap. Front in Deep Ocean or Purple Dream keycap , no top LED. But with rear RGB Underglow.
    • V60 THE2 : on market in Feb. , 2021. The newest models.   18 RGB mode , Hot sawp switch , Seamless PCB Double Shot Keycap , program and setting through driver download.

    Q : on the v60 the2 will I be able to set caps lock as my function key?

    A : Our first edition driver for V60THE2 can program include Light , Button , Macro , but not include FN position. We start to upgrade Driver to adjust FN position. We will upload the newest driver on web-site once it ready.

    Q : Will The Great Wave support RGB Backlight?

    A : There are two editions. First basic edition Great Wave not offer RGB backlight function. And second (this page ) support RGB backlit.

    Q : Whenever I click the left ALT button, it activates the WINDOWS button. and whenever I click the WINDOWS button, the ALT button activates

    A : It should be lock on Arrow mode or Mac mode.

    Please press FN+ left shift and then press "enter".

    It will back to default setting.

  • where to buy?

    USA / Canada

    USA : https://mechanicalkeyboards.com/

    Europe

    UK : http://www.keyboardco.com/

    Nordic : https://www.maxgaming.com/ 

     

    Australia/New Zealand

    https://www.mightyape.co.nz/computers/keyboards-mice?q=brand%7Ekbparadise

Cookie Use
We use cookies to ensure a smooth browsing experience. By continuing we assume you accept the use of cookies.
Learn More